Path: utzoo!utgpu!water!watmath!clyde!att!oucsace!oucs!arp
From: arp@pdp.cs.OHIOU.EDU (John Gordos)
Newsgroups: comp.sys.amiga.tech
Subject: FFS on a 5.25 A1020
Keywords: Can this be done?
Message-ID: <717@pdp.cs.OHIOU.EDU>
Date: 27 Oct 88 20:34:49 GMT
Distribution: na
Organization: Ohio University CS Dept., Athens
Lines: 29



	Hi,

	I'm trying to get FFS running on the 1020 5.25" drive.  My
	understanding is that this should be possible, since the
	drive must be MOUNTed.

	It all seems to work EXCEPT that all the object files I place
	on the drive, give "not an object module" messages when I
	try to run them.   If I copy them back to a known non-FFS 
	device, they still are not object modules.

	I'm using the normal DF2: (renamed DF3:) 5.25" mountlist entry, 
	with the addition of the three FFS entries.  (DosType, FileSystem,
	and a third that escapes me (GlobVec?)).

	SYSTEM:
		B2000 (stock)  one external 3.5 A1010 drive and A1020.
		No Harddrive.

	Any hints would be appreciated.

	John
-- 
=======================					====================
John A. Gordos, III					cbatt!oucs!arp
SAMI/Burke							-or-
							uccba!crta!gordos