Xref: utzoo comp.os.os9:259 comp.sys.atari.st:12358
Path: utzoo!utgpu!attcan!uunet!ncrlnk!ncrcae!ece-csc!mcnc!houser
From: houser@mcnc.org (Kevin D. Houser )
Newsgroups: comp.os.os9,comp.sys.atari.st
Subject: ATARI ST monitor
Keywords: ATARI MONITOR
Message-ID: <3713@alvin.mcnc.org>
Date: 10 Nov 88 19:20:15 GMT
Organization: Microelectronics Center of NC; RTP, NC
Lines: 15


The Magnavox 8CM515 RGB monitor will work properly with the ATARI ST series.
After looking at my CoCo 3 RGB specs, and monitor cable, I have determined that
the 8CM515 has separate Vsync and Hsync inputs. However, I do not have the 
pinout for the monitor's 6 pin DIN jack. Do any Atarians or CoCo 3 users out
there happen to have the pinouts? Otherwise, I have to tear the CoCo
logic board out of the PC type case... 

Also, where can I find the unusual monitor plug that Atari uses to connect
to the computer? All that is necessary is the plug.

Kevin Houser
houser@mcnc.org
(919) 859-5467 H
(919) 248-1996 W