Xref: utzoo comp.graphics:3524 comp.os.vms:9823 comp.sys.dec:851 comp.sys.hp:1183 comp.terminals:937
Path: utzoo!utgpu!attcan!uunet!husc6!mailrus!wasatch!cetron
From: cetron@wasatch.UUCP (Edward J Cetron)
Newsgroups: comp.graphics,comp.os.vms,comp.sys.dec,comp.sys.hp,comp.terminals
Subject: Re: Need to direct drive hpp7585B from VAX-VMS 4.6
Message-ID: <507@wasatch.UUCP>
Date: 4 Nov 88 04:46:41 GMT
References: <10261@ihlpa.ATT.COM>
Reply-To: cetron@wasatch.utah.edu.UUCP (Edward J Cetron)
Organization: Center for Engineering Design, Univ of Utah
Lines: 11


	hmm, we have several that work just fine.  you do have to be
VERY careful about setting up the x-on/x-off handshaking.  Them hp manual
gives several good examples about using the N and M commands to set the
various characters and 'levels'...

	Also verify that the vax terminal line is set to x-on/x-off (I
seem to recall that its ttsync)

-ed
cetron@wasatch.utah.edu