Path: utzoo!utgpu!attcan!uunet!mcvax!hp4nl!esatst!neil
From: neil@yc.estec.nl (Neil Dixon)
Newsgroups: comp.sys.hp
Subject: Using lpr0/lpr1 devices on HP835
Message-ID: <962@esatst.yc.estec.nl>
Date: 4 Nov 88 11:08:25 GMT
Reply-To: neil@esatst.UUCP (Neil Dixon)
Organization: ESTEC/YCV, Noordwijk, The Netherlands
Lines: 16

Does anyone out there know how to use the lpr0/lpr1 device drivers
to drive hp-ib printers on an HP835.  Nomatter how we configure our
system, we always get the message:-


lpr0 unit 0: timeout.
Diagnostic software error from lpr10 (address 4.2.0); status = TIMEOUT

If we use the instr0 drivers then the printers work ok (except for
paging, etc).

-- 
Neil Dixon <neil@yc.estec.nl> UUCP:...!mcvax!esatst!neil, BITNET: NDIXON@ESTEC
Thermal Control & Life Support Division (YC) 
European Space Research and Technology Centre (ESTEC),
Noordwijk, The Netherlands.