Path: utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!hp-pcd!hplsla!hpvcla!ericr
From: ericr@hpvcla.HP.COM (Eric Ross)
Newsgroups: comp.sys.hp
Subject: Re: reading HP150 discs in Vectra
Message-ID: <4340011@hpvcla.HP.COM>
Date: 7 Nov 88 15:14:35 GMT
References: <10966@cup.portal.com>
Organization: Hewlett Packard, Vancouver, WA
Lines: 9

The Vectra will read double sided HP150 discs without any problem.  The
adjustment to this format is automatic when reading, so no overt action
on your part is required.  Formatting in double sided format for the
HP150 can also be achieved by using the FOR150 command.

The Vectra, however, cannot read single sided HP150 discs.

Eric Ross
ericr%hpvcper@hplabs