Path: utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!sm.unisys.com!randvax!edhall
From: edhall@randvax.UUCP (Ed Hall)
Newsgroups: comp.sys.ibm.pc
Subject: Interrupt/Exception Confusion on 80286
Summary: How do you distinguish a COM1 interrupt from a stack overflow?
Keywords: 80286, Interrupts, Protected Mode
Message-ID: <384@rondo.randvax.UUCP>
Date: 1 Nov 88 19:41:05 GMT
Organization: Rand Corp., Santa Monica
Lines: 22

I may be missing something obvious, here:

When running an 80286 in protected mode (and for some limited cases
in real mode) it is possible to generate exceptions with vector numbers
between 0x8 and 0xf.  Now, on a PC/AT, COM1 is at INT 0xc--which is
the INT for a stack overflow.  Just how do you tell the two apart?
How about LPT2 and a general protection violation(0xd)?  And so on.

Of course, the INTEL 80286 reference says all over it that INT 0x0 to
INT 0x1f are ``reserved by INTEL.''

Short of hacking hardware, how do people deal with this problem?  Or am
I missing something?  Do the external hardware vectors mysteriously move
when the 80286 is in protected mode?  Or is there some simple way to
figure out whether an interrupt is external or some internal exception
condition?

Thanks for any help or advice you might give me.

		-Ed Hall
		edhall@rand.org
		hplabs!sm.unisys.com!randvax!edhall