Path: utzoo!attcan!uunet!husc6!mailrus!ncar!umigw!umbio!medsoft!p9.f1.n360.z1.uucp!Dan.Husk
From: Dan.Husk@p9.f1.n360.z1.uucp (Dan Husk)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Tandy 1000SX and EGA Cards
Message-ID: <115.2376F6B3@medsoft.uucp>
Date: 7 Nov 88 15:08:00 GMT
Sender: ufgate@medsoft.uucp (newsout1.18)
Organization: FidoNet node 1:360/1.9 - Augusta Forum, North Augusta SC
Lines: 21


 > From: oolidjr@hubcap.UUCP (Joe Moll) Date: 4 Nov 88 13:09:14 GMT
 > Organization: Clemson University, Clemson, SC Message-ID:
 > <3440@hubcap.UUCP> Newsgroups: comp.sys.ibm.pc,comp.sys.tandy
 > 
 >
 > >Does anyone know if it is possible to get an ATI EGA card to work >in a
 > Tandy 1000SX ? And if so, how ?   Judging from the problems >I went
 > through getting a hard disk controller to work (I had to modify >the
 > controller itself) I doubt it, but I just thought I'd ask.
 > 
Joe...How bout the tigers? Could you provide information on like how to
put a seagate ST225 in a Tandy 1000SX. Thanks

Dan Husk


--  
Dan Husk - via FidoNet node 1:135/3
Medical Software Exchange BBS (305) 325-8709
UUCP: ...uunet!gould!umbio!medsoft!360!1.9!Dan.Husk