Path: utzoo!yunexus!geac!syntron!jtsv16!uunet!mcvax!ukc!eagle.ukc.ac.uk!icdoc!tgould!awm From: awm@gould.stars.flab.Fujitsu.JUNET (Aled Morris) Newsgroups: comp.unix.wizards Subject: Re: >> Help w/ lpr spooler on Sun << Message-ID: Date: 26 Oct 88 16:10:25 GMT Article-I.D.: gould.AWM.88Oct26171025 References: <7398@well.UUCP> <476@gould.doc.ic.ac.uk> <295@auspex.UUCP> Sender: news@doc.ic.ac.uk Organization: Fujitsu Laboratories Ltd., Kawasaki, Japan. Lines: 23 In-reply-to: guy@auspex.UUCP's message of 24 Oct 88 17:01:50 GMT >If you don't have the source, then since you're running on SunOS 4.0 (if >you weren't, you wouldn't have CRTSCTS) you can set the CRTSCTS bit on >the port by including "crtscts" in the list of tty settings in the "ms" >capability in the "printcap" file. You don't have to hack the source up >just to turn CRTSCTS on.... Ooops....there it is, in printcap(5): "Thus, to set the terminal port to which the printer is attached to even parity, tab expansion, no newline to carriage return/line- feed translation, and RTS/CTS flow control enabled, do: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :ms=evenp,-tabs,nl,crtscts:" (All together now, R-T-F-M !) Aled Morris systems programmer mail: awm@doc.ic.ac.uk | Department of Computing uucp: ..!ukc!icdoc!awm | Imperial College talk: 01-589-5111x5085 | 180 Queens Gate, London SW7 2BZ