Xref: utzoo comp.unix.xenix:3859 comp.unix.microport:2009
Path: utzoo!attcan!uunet!nuchat!steve
From: steve@nuchat.UUCP (Steve Nuchia)
Newsgroups: comp.unix.xenix,comp.unix.microport
Subject: Re: Serial Boards
Message-ID: <2653@nuchat.UUCP>
Date: 8 Nov 88 16:31:27 GMT
References: <2652@nuchat.UUCP>
Organization: Public Access - Houston, Tx
Lines: 13

From article <2652@nuchat.UUCP>, by steve@nuchat.UUCP (Steve Nuchia):
> I am successfully running at 9600bps on a Bell Tech 386 with Bell Tech's
> version of Interactive V.3, using a "dumb" port with a "smart" chip
> retrofitted.

By The Way, an earlier incarnation of that driver demonstrated 9600 on
a 16550 plus two 2400 on 8250s, simultaneous uucicos, on a 10MHz 286
running microbug.  Should still be possible to graft it into a microport
linkkit.
-- 
Steve Nuchia	    | [...] but the machine would probably be allowed no mercy.
uunet!nuchat!steve  | In other words then, if a machine is expected to be
(713) 334 6720	    | infallible, it cannot be intelligent.  - Alan Turing, 1947