Path: utzoo!attcan!uunet!seismo!sundc!pitstop!sun!amdcad!ames!ncar!mailrus!tut.cis.ohio-state.edu!bloom-beacon!GOLDHILL.COM!ejs
From: ejs@GOLDHILL.COM (Eric Swenson)
Newsgroups: comp.windows.x
Subject: X11/R3 on Sun 3/60s with SunOS 3.5 and Sunview
Message-ID: <8811022122.AA22642@goldhill.com>
Date: 2 Nov 88 21:22:21 GMT
References: <8811021211.AA26481@EXPO.LCS.MIT.EDU>
Sender: daemon@bloom-beacon.MIT.EDU
Organization: The Internet
Lines: 18


   From: rws@expo.lcs.mit.edu (Bob Scheifler)
   Date: Wed, 02 Nov 88 07:11:16 EST

   ...

   As to the -dev switch, it should work.  Can you be a little
   more specific as to the exact setup hardware and /dev setup,
   and what args you were passing to the server?

Unfortunately, we had to cannibalize our two-screen system temporarily
so I can't pursue this further.  When we get it back together I'll
have the guy who uses it try it again and describe the problem. It
may be that because I had R3 configured to not know about Sunview,
that this was the cause -- but as I said, it will be a bit before I
can test this out again. 

thanks for your response.  -- Eric Swenson