Path: utzoo!attcan!uunet!ncrlnk!ncrcae!hubcap!gatech!bloom-beacon!tut.cis.ohio-state.edu!cwjcc!hal!nic.MR.NET!tank!uxc!ksuvax1!cseg!hcx!gmg From: gmg@hcx.uucp (Greg M. Garner) Newsgroups: sci.electronics Subject: Re: need electroluminescent power supply Summary: LCD Backlight source Keywords: electroluminescent power Message-ID: <1120@cseg.uucp> Date: 9 Nov 88 04:56:40 GMT References: <1176@microsoft.UUCP> Sender: netnews@cseg.uucp Organization: College of Engineering, University of Arkansas, Fayetteville Lines: 40 In article <1176@microsoft.UUCP>, gordonl@microsoft.UUCP (Gordon Letwin) writes: > I have an LCD which is backlit by an electroluminescent panel. These > things take a few milliamps of AC in the 60 to 80 V range, 60 hz to > 400 hz, typically. > [stuff deleted here] > A small transformer would be better, and would guarantee true AC, but > I'm having troubles locating an appropriate one. > > I've heard that there are small power supplies designed to drive these > devices - DC to AC convertors of appropriate voltage and current. Does > anyone have any pointers on these devices and where they might be obtained? > > thanks > > gordon letwin > microsoft Gordon, I have used one of these beasties. It came from Densitron Corporation. They sell 6 different types, which put out a range of 34-110 MA and 67-86 volts, some running at 410 HZ up to 750 HZ. I paid about 10.00 dollars for mine, and it runs a backlight on a 2X40 character display. They also sell displays. Anyway, to get more info on these, call Densitron. By the way, they sent me a complete little folder showing all there small lcd products, and application notes. I really liked the way all there stuff works. Good luck! Densitron Corporation 2540 West 237th ST. Torrence, CA. 90505 USA 213-530-3530 Part number that I am using is: das5v7 (5 volt input) /* I am not associated in any way with densitron other than being a satisfied customer. */ Greg Garner gmg@hcx.uucp path: ...!uunet!harris.cis.ksu.edu!hcx!gmg 501-442-4847