Path: utzoo!utgpu!watmath!clyde!bellcore!texbell!killer!crlabs!bartal!phillip
From: phillip@bartal.CRLABS.COM (Phillip Vogel)
Newsgroups: sci.electronics
Subject: need electroluminescent power supply
Message-ID: <5.2378509E@bartal.CRLABS.COM>
Date: 9 Nov 88 13:38:35 GMT
Organization: Bartal Design Group, Inc. Englewood, NJ
Lines: 28


 > From: gordonl@microsoft.UUCP (Gordon Letwin)
 > Date: 7 Nov 88 18:36:37 GMT
 
 > I have an LCD which is backlit by an electroluminescent panel.  These
 > things take a few milliamps of AC in the 60 to 80 V range, 60 hz to
 > 400 hz, typically.
 >
 > I've heard that there are small power supplies designed to drive these
 > devices - DC to AC convertors of appropriate voltage and current.  Does
 > anyone have any pointers on these devices and where they might be obtained?
 
I have a sample from:
 
        Hantronix, Inc.
        250 Santa Ana Court
        Sunnyvale, Ca 94086
        (408) 736-3191
        FAX: (408)749-0477
 
It's about 1 inch square, and costs about 3 - 5 dollars. I'm sure you could 
get your local sales rep to get you a couple of samples. These things are also 
available from Sanyo, among others.
 
 --  
Phillip M. Vogel - Bartal Design Group, Inc. - Englewood, NJ
DOMAIN: phillip@bartal.CRLABS.COM   UUCP: killer!crlabs!bartal!phillip
DISCLAIMER: Hell, I OWN the company !