Xref: utzoo comp.unix.questions:10321 comp.misc:4141
Path: utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!nsc!taux01!tom
From: tom@taux01.UUCP (Tom Gorodecki)
Newsgroups: comp.unix.questions,comp.misc
Subject: How to disable BRK signal?
Message-ID: <944@taux01.UUCP>
Date: 23 Nov 88 20:16:53 GMT
Reply-To: tom%taux01@nsc.com (Tom Gorodecki)
Organization: National Semiconductor (IC) Ltd, Israel
Lines: 18

Hello ,
On Sun-4/280 with console on ttya a brk signal is used
as an escape character to PROM prompt . This is very 
inconvenient , because turning the console off or
disconnecting the RS232 wire brings the system down.

I tried to connect few pins on the RS232 cable but without 
success.
How can i disable the brk signal (by software or hardware )?
Thanks in advance
Tom.


-- 
Gorodecki Tom.  National Semiconductor (IC)
6 Maskit st. P.O.B. 3007, Herzlia B,  46 104, Israel
UUCP:  {hplabs,pyramid,sun,decwrl}!nsc!taux01!tom
domain:  tom%taux01@nsc.com