Xref: utzoo comp.sources.wanted:5562 comp.sys.ibm.pc.rt:176
Path: utzoo!attcan!uunet!mcvax!prlb2!kulcs!dannyb
From: dannyb@kulcs.uucp (Danny Backx)
Newsgroups: comp.sources.wanted,comp.sys.ibm.pc.rt
Subject: Re: Disassembler for IBM RT?
Message-ID: <137@icarus.kulcs.uucp>
Date: 16 Nov 88 11:55:34 GMT
References: <4121@psuvax1.cs.psu.edu>
Reply-To: dannyb@kulcs.UUCP (Danny Backx)
Organization: Katholieke Universiteit Leuven, Dept. Computer Science
Lines: 20

In article <4121@psuvax1.cs.psu.edu> ehrlich@shire.cs.psu.edu (Dan Ehrlich) writes:
>Does any one have, or know of, a disassmbler/decompiler for the IBM
>RT?  I need to pick apart some object modules.  Something along the
>lines of decomp for the VAXen would be ideal?  Thanks in advance.

Try to use `adb'.

To disassemble the code for routine ROUT, the command
	.ROUT,20?ia
can be used. This will produce the first 32 lines.
Note that a DOT should be put in front of the routine's name, not an underscore.

  -- Danny
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 Danny Backx                            |  mail: Danny Backx
 Tel: +32 16 200656 x 3544              |        Katholieke Universiteit Leuven 
 Fax: +32 16 205308                     |        Dept. Computer Science
 E-mail: dannyb@kulcs.UUCP              |        Celestijnenlaan 200 A
         ... mcvax!prlb2!kulcs!dannyb   |        B-3030 Leuven
         dannyb@blekul60.BITNET         |        Belgium