Path: utzoo!attcan!uunet!husc6!uwvax!tank!nic.MR.NET!hal!cwjcc!mailrus!cornell!uw-beaver!tektronix!percival!parsely!agora!billsey
From: billsey@agora.UUCP (Bill Seymour)
Newsgroups: comp.sys.amiga
Subject: Re: CMI accelerator
Message-ID: <1222@agora.UUCP>
Date: 12 Nov 88 01:51:45 GMT
References: <5188@cbmvax.UUCP:
Organization: Advanced Solutions, Hillsboro, OR
Lines: 32

From article <5188@cbmvax.UUCP:, by daveh@cbmvax.UUCP (Dave Haynie):
: in article <1213@agora.UUCP:, billsey@agora.UUCP (Bill Seymour) says:
: 
:: 	There are currently three pieces of software on our list. DOS-2-DOS,
:: DISK-2-DISK, Live! and X-CAD. 

	At least no one flamed me about the numbering here... I talked to
Central Coast software this week and was informed that the 3.0 version of
DOS2DOS work correctly with our board running at 14MHz. Call them for update
info!

: The problem with X-CAD is the dongle.  The routine in X-CAD that reads the
: dongle is CPU speed dependent, a big no-no for any Amiga program.  The only
: fix I've heard of is to order the non-dongled version of X-CAD, which is or
: at least will be available, according to the Haitex folks, who are currently
: handling it here.

	I've talked to several people lately who've been running X-CAD at 14MHz
with no problems... It seems there are more than one dongles for this program.
The dongleless version will fix all finally though. In the mean time, for those
of you who have versions where the dongle *doesn't* work at 14MHz, switch back
to 7MHz only for saves and print/plots. You should have no problems then.

: -- 
: Dave Haynie  "The 32 Bit Guy"     Commodore-Amiga  "The Crew That Never Rests"
:    {uunet|pyramid|rutgers}!cbmvax!daveh      PLINK: D-DAVE H     BIX: hazy
:               Amiga -- It's not just a job, it's an obsession
-- 
     -Bill Seymour             ...tektronix!reed!percival!agora!billsey
                               ...tektronix!sequent!blowpig!billsey
     Creative Microsystems   Northwest Amiga Group    At Home Sometimes
     (503) 684-9300          (503) 656-7393 BBS       (503) 640-0842