Path: utzoo!attcan!uunet!husc6!mailrus!ames!elroy!gryphon!pnet02!harrye From: harrye@pnet02.cts.com (Harry Evangelou) Newsgroups: comp.sys.amiga Subject: Re: CMI accelerator Message-ID: <8718@gryphon.COM> Date: 15 Nov 88 01:40:12 GMT Sender: root@gryphon.COM Organization: People-Net [pnet02], Redondo Beach, CA. Lines: 32 In message <#18109@pnet02>, billsey@agora.UUCP (Bill Seymour) writes: >I've talked to several people lately who've been running X-CAD at 14MHz >with no problems... It seems there are more than one dongles for this >program. The dongleless version will fix all finally though. In the mean >time, for those of you who have versions where the dongle *doesn't* work >at 14MHz, switch back to 7MHz only for saves and print/plots. You should >have no problems then. No, there is only one dongle. There has been a new version of one of the libraries that handles the problem in a CPU INDEPENDENT way. You can receive the library by sending me a SASE with your original X-CAD libraries disk to the address : Harry Evangelou X-CAD Product Manager Haitex Resources 208 Carrollton Park - Suite 1207 Carrollton, Texas 75006 (214) 241-8030 You may also include a blank disk for all the new X-CAD utilities (if you did not already download them from the networks). ========================================================================== Harry Evangelou X-CAD Project manager PLINK: HAITEX HAITEX Resources UUCP : {ames!elroy, }!gryphon!pnet02!harrye PHONE (214) 241-8030 INET : harrye@pnet02.cts.com ========================================================================== UUCP: {ames!elroy, }!gryphon!pnet02!harrye INET: harrye@pnet02.cts.com