Path: utzoo!attcan!uunet!ccicpg!cci632!jhs
From: jhs@cci632.UUCP (John Sentiff)
Newsgroups: comp.sys.amiga
Subject: FastMemFirst GURUs
Message-ID: <22663@cci632.UUCP>
Date: 19 Nov 88 15:13:32 GMT
Reply-To: jhs@ccird1.UUCP (John Sentiff)
Distribution: comp.sys.amiga
Organization: CCI, Communications Systems Division, Rochester, NY
Lines: 14

<>
   I have been running WB 1.3 for a month or two now and have never been able
to run the FastMemFirst program without getting an immediate GURU. This happens
whether I run it from the CLI or from the WorkBench. My setup is an Amiga 2000
with a GVP SCSI/RAM board with 1 Meg. of RAM installed and a Seagate ST277N
hard drive. Everything else seems to work fine (i.e. other problems have been
traced to operator stupidity).

   Could somebody help me shed some light on this problem?

--
John Sentiff
Computer Consoles, Inc.
...!{cornell,rutgers}!rochester!cci632!jhs