Path: utzoo!attcan!uunet!mcvax!unido!tub!tmpmbx!netmbx!robocop
From: robocop@netmbx.UUCP (Thorsten Ebers)
Newsgroups: comp.sys.amiga
Subject: Re: Bug in FFS
Keywords: funny bug
Message-ID: <1731@netmbx.UUCP>
Date: 21 Nov 88 21:09:25 GMT
References: <1702@netmbx.UUCP> <5250@cbmvax.UUCP>
Reply-To: robocop@netmbx.UUCP (Thorsten Ebers)
Organization: netmbx Public Access Unix, Berlin, West Germany
Lines: 30

>You must be using a hard disk controller other than a 2090, since
>the DH0: partition is automounted by the 2090 as an old file system
>partition.

Yes.
In a german magazin (C'T.) there was an article where you can build an 
Omti-Interface for the A1000/2000.If you interested with this article i can
send you copies pages.With that you can attach a st-506 hard disk to the 
A1000.I have a Fujitsu hard disk(HD).
All tracks formatted with ffs.I cannot automount yet.


>I just tried Addbuffers fh0: 0 on my system, then did an info.
>
>Nothing bad happened.  What was I supposed to see ?

You should see a requester saying that you should insert the device 'HD:'.
I named my dh0: 'hd'.

>Often, small details (like what setup you have and what you see happening
>are often helpful)

I will keep that in mind.I can learn,so I can become a manager :-).

thorsten

-- 
Thorsten Ebers                      Overseas:..pyramid!tmpmbx!netmbx!robocop
Goerresstr.20                       Europe  :..altger!tmpmbx!netmbx!robocop
1000 Berlin 41                      Germany :robocop@netmbx.UUCP
Germany           Phone:030/851 84 60