Path: utzoo!attcan!uunet!cbmvax!andy
From: andy@cbmvax.UUCP (Andy Finkel)
Newsgroups: comp.sys.amiga
Subject: Re: hp-paintjet <--> Digipaint II
Message-ID: <5280@cbmvax.UUCP>
Date: 21 Nov 88 18:40:04 GMT
References: <7880007@hpuamsa.UUCP>
Reply-To: andy@cbmvax.UUCP (Andy Finkel)
Organization: Commodore Technology, West Chester, PA
Lines: 45

In article <7880007@hpuamsa.UUCP> marco@hpuamsa.UUCP (Marco Lesmeister) writes:
>I'm having problems with connecting my hp paintjet to my Amy 
>and then using it from Digipaint II.
>
>I used the driver from my 1.3 disk, and everything works alright
>when I print something with f.i.:
>
>copy df0:/s/startup-sequence to prt:
>
>but Digipaint doesn't print the images to the paintjet.
>I think my connection should be alright, because the file-print works
>but the image-print just keeps my Amy waiting forever to finish.
>

Check all your graphics settings in Preferences.  (all of them)
Your copy tested the connection, and the text mode, but nothing else.

Make sure your PaintJet driver is on the Workbench disk.
Make sure preferences printer setting is set to the HP.

And, check things like page size; make sure you are using the
same settings as under 1.2.

(you did boot from your Workbench disk when you fired up Digipaint II, right ?)


>Could someone help me with this?
>
>Thanks,
>
>Marco Lesmeister       |\    /|           Hewlett Packard
>Coudenhoveflat 80      | \  / |           Startbaan 16
>1422 VK Uithoorn       |  \/  |           1187 XR Amstelveen
>Holland 02975-65878    |      |____       Holland 020-5476911


-- 
andy finkel		{uunet|rutgers|amiga}!cbmvax!andy
Commodore-Amiga, Inc.

"Possibly this is a new usage of the word 'compatible' with which
 I was previously unfamiliar"

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.