Path: utzoo!attcan!uunet!husc6!mailrus!uflorida!gatech!mcnc!rti!sunpix!matthew
From: matthew@sunpix.UUCP ( Sun NCAA)
Newsgroups: comp.sys.apple
Subject: Re: Need to know signal designations for //e rear panel mouse conn.
Summary: Its not a mouse connector, but here goes...
Message-ID: <279@greens.UUCP>
Date: 18 Nov 88 20:24:52 GMT
References: <1411@neoucom.UUCP>
Organization: Sun Microsystems, Research Triangle Park, NC
Lines: 32


>I would be most appreciative if somebody could [preferably] email or
>post the pin-outs for the mouse connector.  I figured that I would
>make a little pigtail to go from the DE-9P on the game control over
>to the 14 pin DIP socket in the ][+.  I know the pin-outs for the
>DIP socket; no problem there.


What you are referencing has nothing to do with a mouse connector. Only
the Apple //c has a combination Joystick, Mouse port. The DE-9 connector
on the Apple //e is strickly a joystick port.

Any way the pinout you are looking for is:

DE-9	signal	DIP-16
 1)    switch 1   [3]
 2)    +5vdc      [1]
 3)    ground     [8]
 4)    pdl 2      [7]
 5)    pdl 0      [6]
 6)    switch 2   [4]
 7)    switch 0   [2]
 8)    pdl 1     [10]
 9)    pdl 3     [11]


I hope this helps you out.
(btw: I did this mod to my own Apple ][plus when I purchased my Apple //c)
-- 
Matthew Lee Stier     (919) 469-8300|
Sun Microsystems ---  RTP, NC  27560|          "Wisconsin   Escapee"
uucp: {sun, rti}!sunpix!matthew     |