Path: utzoo!attcan!uunet!husc6!mailrus!ames!pasteur!ucbvax!VM1.NODAK.EDU!NU133716
From: NU133716@VM1.NODAK.EDU (Brian Glaeske)
Newsgroups: comp.sys.apple
Subject: Re: Need to know signal designations for //e rear panel mouse
 conn.
Message-ID: <8811201559.aa05342@SMOKE.BRL.MIL>
Date: 20 Nov 88 20:53:24 GMT
References: <mailrus!cwjcc!neoucom!wtm@RUTGERS.EDU>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 14

Bill;

  I don't know if this will help or not since I forgot where I put all
the information you wanted.

  The mouse connector has 9 pins, while the old I/O had 16.
I believe that I found through expermenting on my //c that the new
connector was missing the AN0-AN3.  AN0-AN3 are announciator outputs.
They also didn't include the C040 STROBE and left off pin 9 and 16 which
had no internal connections.

  I'm sorry I can't tell you where the remaining pins are on the 9 pin
output.
           Brian Glaeske      nu133716@vm1.NoDak.edu