Path: utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!ucbvax!UA1VM.BITNET!JDONAHOE
From: JDONAHOE@UA1VM.BITNET (JAMES DONAHOE)
Newsgroups: comp.sys.atari.st
Subject: Speed Adjustment For 314 Drive
Message-ID: <8811221626.AA21906@ucbvax.Berkeley.EDU>
Date: 22 Nov 88 15:56:34 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 14

I hope this question hasn't been asked too often(if at all), but I've
got an SF314 drive with a GREEN light and I need to slow it down just
a tad (from 304 to 300). I opened it up enough to see the component
side which indicated it was a TDK41V. There was one spot on the board
that looked like a small pot with a plus shaped indention in it. Is
this the speed adjustment?? My problem is that my Translator One/Spectre
128 can't seem to correctly format Mac disks. The suggestion I received
was to be sure the drive was as close to 300 rpm as possible. Has anyone
got any other suggestions? I would appreciate any help.

       James Donahoe

BITNET: JDONAHOE@UA1VM
others: JDONAHOE@UA1VM.UA.EDU