Path: utzoo!attcan!uunet!husc6!rutgers!att!westmark!dave
From: dave@westmark.UUCP (Dave Levenson)
Newsgroups: comp.sys.att
Subject: Re: 6300+ 512k to 640k upgrade
Message-ID: <602@westmark.UUCP>
Date: 24 Nov 88 01:01:38 GMT
References: <1355@PSUECLB>
Organization: Westmark, Inc., Warren, NJ, USA
Lines: 19

In article <1355@PSUECLB>, crs@psueclb.BITNET writes:
> 
> I am trying to upgrade my 6300+ from 512k to 640k I have 18 64k chips that
> I have installed on the expansion banks on the mother board however I cant
> figure out how to set the dip switches...the manual isnt clear on this
> The pc came "standard" with 512k, can anyone help?
> chuck


If you have 512k in bank 1, and 128k in bank2 (which I think is what
you have) then you should set DSW2 positions 1 - 4 to ON OFF ON OFF.
If that doesn't work, try ON ON OFF OFF.  When you hit the right
combination, the power-on-self-test will display 640 Kbyte memory.

-- 
Dave Levenson
Westmark, Inc.		The Man in the Mooney
Warren, NJ USA
{rutgers | att}!westmark!dave