Path: utzoo!attcan!uunet!husc6!mailrus!iuvax!pur-ee!pur-phy!tippy!bah
From: bah@tippy.uucp
Newsgroups: comp.sys.cbm
Subject: Re: Another 1541 repair question
Message-ID: <24100001@tippy>
Date: 21 Nov 88 01:04:00 GMT
References: <6580010@hplsla.HP.COM>
Lines: 8
Nf-ID: #R:hplsla.HP.COM:6580010:tippy:24100001:000:364
Nf-From: tippy.uucp!bah    Nov 20 20:04:00 1988


I see nothing wrong in gluing it. But I have changed a couple of those
pins since they can be found in any hardware store. Most are a little
too long, so just clip off the excess. I believe they are called
'compression or friction' pins. To be safe, take the original along
and match it. The new one will be tight.

    Bob Hahn        ....ihnp4!itivax!duncan!bah