Path: utzoo!attcan!uunet!husc6!rutgers!att!ihlpl!figlik
From: figlik@ihlpl.ATT.COM (Jim Figlik)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Com3 and Com4
Message-ID: <7681@ihlpl.ATT.COM>
Date: 15 Nov 88 17:06:08 GMT
References: <2677@silver.bacs.indiana.edu>
Reply-To: figlik@ihlpl.UUCP (55241-Figlik,J.R.)
Organization: AT&T Bell Laboratories - Naperville, Illinois
Lines: 19

In article <2677@silver.bacs.indiana.edu> millerp@silver.bacs.indiana.edu (Lost My Mind) writes:
>
>Hi, I'm working on a terminal emulation program at work and I've
>run into a slight problem. One of the tech's here has an IBM Clone
>and they want to put their 'Internal Half-Card' Modem in as either
>Com3 or Com4 depending on ???? Anyway, I need to know what the interrupt
>vector address for these comports are, I can't find it in my manual 
>mound. I know where the control registers for these comports are, so
>if someone could e-mail or post the interrupt vector addresss for these
>comports I would really appriciate it.

Com1 is 0x3F8 and usually uses IRQ4, Com2 is 02F8 and usually uses IRQ3. 

Jim
-- 
 Name/Number:  Jim Figlik      (312) 979-3478
Organization:  CAP Gemini America @ AT&T Bell Labs, Indian Hill, IL
Elec.Address:  {world}!att!ihlpl!figlik
Phys.Address:  2000 N. Naperville Rd/IH 6U-212, Naperville, IL 60566-7033