Xref: utzoo comp.sys.att:4746 comp.sys.ibm.pc:21299
Path: utzoo!attcan!uunet!husc6!rutgers!iuvax!inuxc!att!ihlpa!drf
From: drf@ihlpa.ATT.COM (Feliciano)
Newsgroups: att.sys.pc6300,comp.sys.att,comp.sys.ibm.pc
Subject: Printer Problem
Message-ID: <10437@ihlpa.ATT.COM>
Date: 15 Nov 88 22:53:18 GMT
Organization: AT&T Bell Laboratories - Naperville, Illinois
Lines: 23


I am having printer problems and hope someone can shed a little
light on the problem.  I have a Radio Shack model DMP130 printer
hooked up to an AT&T 6300 PC.  The problem entails Ctrl-Prt Sc
(continuous screen print) not working from MS-DOS while Prt Sc 
(screen dump) has no problems.  Interestingly, I have *no* problem
with Ctrl-Prt Sc while running CTRM *unless* I escape to MS DOS
using F4- once given the DOS prompt, Ctrl-Prt Sc results in an
error in writing to the printer with the notorious abort, retry,
ignore message.  A continuous screen print does not work with
Lotus 123, but *does* work with Sideways 123 and Microsoft Word!

I would appreciate any insight or, for that matter, speculation.

Thanks in advance.



				Dave Feliciano
				..!ihnp4!ihlpa!drf
				AT&T Bell Labs
				IH 6N-442
				(312) 979-3445