Path: utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ncar!umigw!umbio!medsoft!p9.f1.n360.z1.uucp!Dan.Husk
From: Dan.Husk@p9.f1.n360.z1.uucp (Dan Husk)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Com3 and Com4
Message-ID: <133.23842393@medsoft.uucp>
Date: 17 Nov 88 15:42:00 GMT
Sender: ufgate@medsoft.uucp (newsout1.18)
Organization: FidoNet node 1:360/1.9 - Augusta Forum, North Augusta SC
Lines: 30


 > From: figlik@ihlpl.ATT.COM (Jim Figlik) Date: 15 Nov 88 17:06:08 GMT
 > Organization: AT&T Bell Laboratories - Naperville, Illinois Message-ID:
 > <7681@ihlpl.ATT.COM> Newsgroups: comp.sys.ibm.pc
 > 
 >
 > In article <2677@silver.bacs.indiana.edu>
 > millerp@silver.bacs.indiana.edu (Lost My Mind) writes: > >Hi, I'm
 > working on a terminal emulation program at work and I've >run into a
 > slight problem. One of the tech's here has an IBM Clone >and they want
 > to put their 'Internal Half-Card' Modem in as either >Com3 or Com4
 > depending on ????
 Comm Port           Base(HEX)       IRQ
----------           ---------       ----
1                       3F8         4
2                       2F8         3
3                       3E8         4
4                       3E0         3
5                       2F0         4
6                       2E8         3
7                       000         0
8                       000         0
Jim..The COMMS according to QMODE.
Dan (-|

--  
Dan Husk - via FidoNet node 1:135/3
Medical Software Exchange BBS (305) 325-8709
UUCP: ...uunet!gould!umbio!medsoft!360!1.9!Dan.Husk
ARPA: Dan.Husk@p9.f1.n360.z1.uucp