Xref: utzoo comp.sys.ibm.pc:21379 comp.sys.misc:1953
Path: utzoo!attcan!uunet!lll-winken!lll-tis!helios.ee.lbl.gov!pasteur!ames!oliveb!oliven!slif
From: slif@oliven.olivetti.com (Mike Slifcak)
Newsgroups: comp.sys.ibm.pc,comp.sys.misc
Subject: Help with DTK serial/parallel board
Keywords: dtk PTI-201, switch settings
Message-ID: <32826@oliveb.olivetti.com>
Date: 18 Nov 88 21:53:39 GMT
Sender: news@oliveb.olivetti.com
Distribution: na
Lines: 27


   The local distributors for PC add-on products,
   who sell DTK products, do not have the information
   for setting up this board.  Thanks in advance
   if you can be of help.
 
   I have a 2-serial, 1 parallel card for PC XT/AT.
   It's made by dtk.  The silk screen says PTI-201.
   SW1 is 8-DIP switch, SW2 is 4-DIP switch.
   There is one 2-pin jumper and one 3-pin jumper.
   [I feel like the hands and eyes of the game "adventure" !]
   I would prefer knowing about all possible settings
   for this board, but I'll settle for this much:

   serial #1 : COM1, IRQ 4  ie, "standard"
   serial #2 : COM2, IRQ 3  ie, "standard"
   parallel  : LPT0, IRQ 7, not to conflict with
			    printer port on Hercules card.
   parallel  : LPT1, IRQ 7
   parallel  : LPT2, IRQ 7, not to conflict with
			    printer port on Hercules card.

   Since I don't regularly read this newsgroup,
   please e-mail all responses directly to me at:

	{ames,sun,mtunb}!oliveb!slif

   or call:  (408) 996-3867 ext. 2244