Path: utzoo!attcan!uunet!ncrlnk!ncrcae!hubcap!gatech!rutgers!bellcore!texbell!merch!cpe!hal6000!trsvax!reyn
From: reyn@trsvax.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: Tandy system Bugs??
Message-ID: <193300082@trsvax>
Date: 21 Nov 88 14:52:00 GMT
References: <72@mtsu.UUCP>
Lines: 7
Nf-ID: #R:mtsu.UUCP:72:trsvax:193300082:000:345
Nf-From: trsvax.UUCP!reyn    Nov 21 08:52:00 1988


The tx does have an Intel 80286 rather than an 8086 or 8088, and there are a few
 instructions which behave differently.  If your software won't run on another
 80286 system, there's your culprit.

 Check any Intel 80286 software manual for the differences, one which comes to
 mind is a different value for the SP register when you push it.