Path: utzoo!attcan!uunet!husc6!mailrus!uflorida!gatech!psuvax1!psuvm.bitnet!et2
From: ET2@PSUVM.BITNET (Brad Erlwein)
Newsgroups: comp.unix.microport
Subject: strange problem with async connection
Message-ID: <61666ET2@PSUVM>
Date: 15 Nov 88 14:40:22 GMT
Organization: Penn State University - Center for Academic Computing
Lines: 13

I am experincing a very strange problem while running
kermit through a 9600 baud IDX line.  The program had
worked well for the first 4 or 5 days, then it started
rebooting the system everytime I run it.  There is no
core dump, or error message of any type...just a reboot.
The system works at 1200 baud though.  At 4800 baud, it
works, but looses lots of characters.  Anyone else had
any problems like this or heard of it before?  I am
running Microport SYs V 3.0e with DOSMerge.

 Brad Erlwein                      |" ...When bad men combine,
 Microcomputer Systems Consultant  |    the good must associate,
 CAC/ASG            |  else they will fall, one by one, an unpitied
 Penn State Univ.   |  sacrifice in a contemptible struggle." E. Burke