Path: utzoo!attcan!uunet!husc6!mailrus!eecae!cps3xx!cpsvax!kuan
From: kuan@cpsvax.cps.msu.edu (Yih-pyng Kuan)
Newsgroups: comp.windows.ms
Subject: Re: Windows 2.0x on the Tandy 2000?
Message-ID: <1078@cps3xx.UUCP>
Date: 14 Nov 88 19:51:13 GMT
References: <746@hemingway.WEITEK.COM>
Sender: usenet@cps3xx.UUCP
Reply-To: kuan@cpsvax.UUCP (Yih-pyng Kuan)
Organization: Michigan State University, Computer Science Department
Lines: 44

Article 1 of comp.windows.ms:
Path: cps3xx!eecae!mailrus!purdue!bu-cs!mirror!billc
From: billc@mirror.TMC.COM (Bill Callahan)
Newsgroups: comp.windows.ms
Subject: CodeView under new Windows
Message-ID: <19626@mirror.TMC.COM>
Date: 11 Nov 88 15:15:48 GMT
Reply-To: billc@prism.TMC.COM (Bill Callahan)
Organization: Mirror Systems, Cambridge Mass.
Lines: 12


Well, it's time to get the ball rolling for this newsgroup, so I will start
it with a question.

What experiences have people had with installing and using CodeView under
Windows?  I have heard much hype, but no word from someone who has done it.
How did it go, and, what sort of machine and periperals did you use?

---------------------------------------------

Bill Callahan			 billc@mirror.TMC.COM
		{mit-eddie, pyramid, wjh12, xait, datacube}!mirror!billc


Received: by cpsvax.cps.msu.edu (1.2/4.3); id AA21305; Sat, 12 Nov 88 20:56:08 est
Date: Sat, 12 Nov 88 20:56:08 est
From: kuan (Yih-pyng Kuan)
Message-Id: <8811130156.AA21305@cpsvax.cps.msu.edu>
To: billc@prism.TMC.COM
Subject: Re: CodeView under new Windows
Newsgroups: comp.windows.ms
In-Reply-To: <19626@mirror.TMC.COM>
Organization: Michigan State University, Computer Science Department
Cc: 

Hi,
   I don't use ms-windows for a while. As far as I can remember, you can
use another monitor to show windows and use your original monitor to
show debugging tool's screen. At that time, there was no connection
between windows and code-view, but there was connection between windows
and symdeb.
   If this does not answer your question and if you get answer, please
inform me.