Path: utzoo!attcan!uunet!wa3wbu!john
From: john@wa3wbu.UUCP (John Gayman)
Newsgroups: comp.dcom.modems
Subject: Re: Telebits Trailblazer +
Summary: Here are my configs for TB+
Message-ID: <171@wa3wbu.UUCP>
Date: 18 Dec 88 18:39:56 GMT
References: <1147@csuchico.EDU>
Distribution: na
Organization: WA3WBU, Marysville,PA
Lines: 49

In article <1147@csuchico.EDU>, fenris@csuchico.EDU (Chris Anderson) writes:
> We just got in some TrailBlazer Plus's, and I'm trying to
> get them to work with uucp and cu. Can anybody give me some
> advice?
> 
      I assume you already know that you can only communicate with
Hayes modems at 1200 or 2400 baud. I'm using the TB+ with Microport V/386
and here are my pertinant configuration files:

/usr/lib/uucp/Dialers entry for TB+:

########################
#
#  Telebit Trailblazer
#
########################
tb1200	=W-,	"" BREAK "" A\pA\pA\pT OK ATS50=2DT\T 1200
tb2400	=W-,	"" BREAK "" A\pA\pA\pT OK ATS50=3DT\T 2400
tbfast	=W-,	"" BREAK "" A\pA\pA\pT OK ATs50=255DT\T FAST	

/usr/lib/uucp/Devices entries:

ACU	tty00	-	1200	tb1200
ACU	tty00	-	2400	tb2400
ACU	tty00	-	9600	tbfast
ACU	tty00	-	19200	tbfast

Trailblazer register settings:

E0 F1 M0 Q6 T V1 X1     Version BA4.00
S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=090 S08=002 S09=006
S10=007 S11=090 S12=050 
S45=000 S47=020 S48=000 S49=000
S50=000 S51=255 S52=002 S53=004 S54=003 S55=000 S56=017 S57=019 S58=000 S59=000
S60=000 S61=070 S62=003 S63=001 S64=001 S65=000 S66=000 S67=000 S68=255 
S90=000 S91=000 S92=001 S95=000 
S100=000 S101=000 S102=000 S104=000 
S110=000 S111=030 S112=001 
S121=000 


     I hope this helps.  When I use the TB+ with "cu", I usually just
invoke "cu -ltty00 -s2400", then send a couple a's followed by AT. The
TB+ should return a "ok". Then you can dial normally with ATDT. The
a's with delays between them is a normal part of the Dialers file entries.
I hope this helps.


						John