Path: utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!pasteur!ucbvax!ccu.umanitoba.ca!andchan
From: andchan@ccu.umanitoba.ca (Andrew Chan)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: NCSA Telnet with WD8003A PS/2 card
Message-ID: <494*andchan@ccu.UManitoba.CA>
Date: 17 Dec 88 08:31:00 GMT
References: <1345127@UBCMTSG.BITNET>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 18

Hi Alan:

I've tried out the modified NCSA Telnet and it basically work fine.  Thanks!
I do have a problem though.  When downloading a large file from a Sun 4
to the PC, the PC will take in the first few trunks and then hangs.
There is no way to recover except reboot.  I've downloaded the same file
from the same machine to a PC AT also running NCSA telnet (with 3COM 301).
without any problem.  Any hint on that?

P.S.:  I've tried changing those rwin, mtu and maxsg parameters and they
       don't help.  I've also changed the interrupt level of the WD8003A
       card to something other than INT 3 (though I understand NCSA
       Telnet doesn't use it).  The NCSA manual suggests that it may still
       be a factor?

       All in all, no luck!

Your help appreciated...