Path: utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!nrl-cmf!ukma!gatech!hubcap!ncrcae!ncrlnk!uunet!mcvax!ukc!dcl-cs!nott-cs!ucl-cs!susher
From: susher@ucl-cs.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Monitors compatible with Atari (was: Re: SC1224 Monitor Buzz)
Message-ID: <128@ucl-cs.UUCP>
Date: 16 Dec 88 12:03:08 GMT
Sender: susher@ucl-cs.UUCP
Lines: 14

From: susher@uk.ac.ucl.cs


The ST's RGB port is a standard analogue RGB port. I have connected a 
Ferguson MC01 TV/monitor to mine with no difficulty. The points to watch 
out for are:-

	(i)	The monitor must be able to display Analogue RGB
	(ii)	The monitor must have a loudspeaker (unless you want to
			use an external one with an amplifier)

I hope this will be helpful.

			Stephen Usher.