Xref: utzoo comp.sys.att:4916 unix-pc.general:1861
Path: utzoo!utgpu!watmath!clyde!att!osu-cis!n8emr!gws
From: gws@n8emr.UUCP (Gary Sanders )
Newsgroups: comp.sys.att,unix-pc.general
Subject: Re: 3b1 Upgrade
Message-ID: <711@n8emr.UUCP>
Date: 12 Dec 88 23:26:41 GMT
References: <8516@alice.UUCP>
Reply-To: gws@n8emr.UUCP (Gary Sanders (n8emr))
Organization: Ham BBS, 614-457-4227 (1200/2400/19.2 telebit,8N1)
Lines: 20

>In article <8516@alice.UUCP> wilber@alice.UUCP (Bob Wilber) writes:
>>... I'm not keen on removing the second fan in
>>order to poke kludgey connectors through the grate... 
>
No one is forcing you do anything, with the daughter board.  Whenever 
you get the board put the dam thing where you want it.  If you dont want
to mount the board where it works best and can find someplace to
mount it inside "go for it.." I can tell you that with a 1/2HT disk in 
the 7300 the machine has very little room inside the system to mount 
anything else.

On the dual disk upgade I have, I  run all of the cables out the grate of 
1 fan and it works fine. I suspect that johns daughter board will have
enough cable to be put in the fan area, if you want it someplace else
legnthen the cables..

-- 
Gary W. Sanders (osu-cis!n8emr!gws, gws@osu-cis) (cis) 72277,1325
(packet) N8EMR @ W8CQK  (ip addr) 44.70.0.1
HAM/SWL/SCANNER BBS (1200/2400/19.2-PEP) 614-457-4227