Path: utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!gatech!ncar!husc6!bunny!cayman!chris
From: chris@cayman.COM (Chris North                                chris@cayman.COM)
Newsgroups: comp.sys.mac
Subject: Mac SE Simm Installation
Message-ID: <1754@cayman.COM>
Date: 19 Dec 88 19:12:57 GMT
Organization: Cayman Systems Inc., Cambridge Ma
Lines: 20



I just purchased 2 - 1 meg SIMMS to put into my brand new Mac SE.  The new
SEs have a jumper that is switched for adding 1 meg SIMMS rather than cut
the resistor as was done before.  My questions is this:  The jumper has two 
choices '1M' and '2/4M'.  Does this configuration mean that I can not have
a memory configuration of 2.5 meg?  I put both 1 meg SIMMS in and 2 256K
SIMMS but the Mac only recognizes 2 meg of memory.  Any enlightment on this
topic would be very helpful.  Thanks in advance.

Chris North
Cayman Systems, Inc.
Cambridge, MA  02139

chris@cayman.com
-- 
Chris North                                chris@cayman.COM
Cayman Systems
26 Lansdowne Street
Cambridge MA  02139                        617-494-1999