Path: utzoo!attcan!uunet!ncrlnk!ncrcae!ece-csc!mcnc!rutgers!cs.utexas.edu!ut-emx!jdm
From: jdm@ut-emx.UUCP (Jim Meiss)
Newsgroups: comp.sys.mac.programmer
Subject: Bug in LSC 3.0's DRVR numbering
Keywords: LSC, Desk Accessory
Message-ID: <8766@ut-emx.UUCP>
Date: 13 Dec 88 15:57:36 GMT
Organization: The University of Texas at Austin, Austin, Texas
Lines: 17


	I've discovered that when you set
the DRVR # to anything other than 12, in the
LSC dialog box, that LSC simply ignores the setting
and sets the DRVR to 12 anyway.
	Now I realize that using the default 12 is
fine in most cases, however if the ability to change
the number is advertised, it should work!
	I wanted to set the DRVR to some other number to
avoid conflict with Smart Alarms, which in my system uses
DRVR 12 and 13. I'm afraid to renumber these DRVR's because
I think Smart Alarms might be sensitive to this


				Jim Meiss				
		 		jdm@emx.utexas.edu
				jdm@fusion.utexas.edu