Path: utzoo!attcan!uunet!ccicpg!felix!dhw68k!thecloud
From: thecloud@dhw68k.cts.com (Ken McLeod)
Newsgroups: comp.sys.mac.programmer
Subject: Comp.binaries.mac (was Re: Bug in LSC 3.0's DRVR numbering)
Summary: LSC 3.01p3 patcher, sending binaries
Keywords: LSC, Desk Accessory, binaries, submit
Message-ID: <17093@dhw68k.cts.com>
Date: 17 Dec 88 11:52:48 GMT
References: <8766@ut-emx.UUCP> <827@husc6.harvard.edu>
Reply-To: thecloud@dhw68k.cts.com (Ken McLeod)
Organization: Wolfskill residence; Anaheim, CA (USA)
Lines: 25

In article <827@husc6.harvard.edu> siegel@endor.UUCP (Rich Siegel) writes:
>
>	This is fixed in 3.01p3; I've uploaded the patcher to comp.binaries,
>and it should be there soon.
>
>	(BTW, is it sufficient to PNews it to comp.binaries.mac, or do
>I actually have to mail it to some moderator?)

 Yes! You must mail binaries to the moderator (if you post directly to
comp.binaries.mac, the file will most likely end up in the bitbucket!)

 To the best of my knowledge, this is still the correct address to send
comp.binaries.mac submissions to: (oops, split an infinitive there...)

                  felix!macintosh@ics.uci.edu
             or      macintosh@felix.UUCP


 (You could also try mailing it to me! :-) :-))

-- 
==========     .......     =============================================
Ken McLeod    :.     .:    felix!dhw68k!thecloud@ics.uci.edu
==========   :::.. ..:::   InterNet: thecloud@dhw68k.cts.com
                ////       =============================================