Path: utzoo!attcan!uunet!ncrlnk!ncrcae!hubcap!gatech!dscatl!wa4mei!rsj From: rsj@wa4mei.UUCP (Randy Jarrett WA4MEI) Newsgroups: comp.unix.microport Subject: Re: TrailBlazer with V/AT Summary: My setup Keywords: Need Setup Pointers Message-ID: <1791@wa4mei.UUCP> Date: 15 Dec 88 23:45:09 GMT References: <354@cocktrice.UUCP> Reply-To: rsj@wa4mei.UUCP (Randy Jarrett WA4MEI) Organization: Amateur Radio Gateway WA4MEI, Chamblee Ga. Lines: 78 In article <354@cocktrice.UUCP> mdm@cocktrice.UUCP (Mike Mitchell) writes: >I have recently added a Telebit TrailBlazer+ to my system, and I am >wondering if anyone out there has the optimal setup parameters to make >this beast scream with V/AT? > >I currently have the beast configured and operating with a couple of >links, so it is operational. There were some changes that I made to the >default factory configuration. These changes have come from various >places on the net, however they are not specific to V/AT. > >So far I am averaging somewhere on the order of 675 chars/sec for file >transfer (this blows away what I was doing), however I am wondering if >there might be a nifty way to bump this up. > >Thanks for any pointers. > > >-- >Mike Mitchell BELL: (505) 471-7639 >2020 Calle Lorca #43 ARPA: mdm@cocktrice.UUCP >Santa Fe, NM 87505 UUCP: ...!uunet!dmk3b1!cocktrice!mdm Below is the setup that I am using with my TB+ on V/AT 2.4. I am also using a version of uugetty that changes the value in S50 to 255 when I am calling a system at the higher speed. Also important is to set S92 to 1 which will cause the system to answer with the PEP tones last so as to not drive the 1200 and 2400 baud modems crazy. As far as transfer speed goes the second section below shows my system averages for two days. The sites kd4nc, gatech, and nanovx are running trailblazers. kd4nc is also a V/AT 2.4 system and nanovx is a Xenix system and as you can see the best transfers seem to be to nanovx. I'll leave any conculsions to you. I am currently running a Trailblazer and 1 hayes 2400 modems. My second Trailblazer is on the way and the hayes will be put on the shelf with its mate. I have a Connect Tech 8 port inteligent board and kd4nc is running their 4 port. The boards work real well and we havn't had any problems with them. E0 F1 M1 Q0 P V1 X1 Version BA4.00 S00=004 S01=000 S02=255 S03=013 S04=010 S05=008 S06=002 S07=040 S08=002 S09=006 S10=007 S11=070 S12=050 S45=000 S47=004 S48=000 S49=000 S50=000 S51=255 S52=002 S53=001 S54=002 S55=000 S56=017 S57=019 S58=002 S59=000 S60=000 S61=045 S62=003 S63=001 S64=000 S65=000 S66=000 S67=000 S68=002 S90=000 S91=000 S92=001 S95=002 S100=000 S101=000 S102=000 S104=000 S110=255 S111=255 S112=001 S121=000 Remote K-Bytes K-Bytes K-Bytes Hours Hours AvCPS AvCPS # # SiteName Recv Xmit Total Recv Xmit Recv Xmit Recv Xmit -------- --------- --------- --------- ------ ------ ----- ----- ---- ---- kd4nc 0.300 1726.845 1727.145 0.00 0.60 38 804 6 90 wgs6386 0.000 867.041 867.041 0.00 1.09 0 220 0 546 dscatl 0.879 1981.860 1982.739 0.00 3.95 89 139 4 106 emcard 0.313 1.086 1.399 0.00 0.00 83 242 2 4 gatech 1581.256 0.000 1581.256 0.95 0.00 464 0 68 0 nanovx 0.000 5744.270 5744.270 0.00 1.13 0 1417 0 272 bcs3b2 0.504 0.000 0.504 0.00 0.00 95 0 2 0 Remote K-Bytes K-Bytes K-Bytes Hours Hours AvCPS AvCPS # # SiteName Recv Xmit Total Recv Xmit Recv Xmit Recv Xmit -------- --------- --------- --------- ------ ------ ----- ----- ---- ---- kd4nc 0.100 2434.802 2434.902 0.00 1.06 22 636 2 112 gatech 3189.493 0.285 3189.778 1.91 0.00 464 252 142 2 emcard 0.557 0.287 0.844 0.00 0.00 119 282 2 2 nanovx 0.000 3382.175 3382.175 0.00 0.64 0 1457 0 151 dscatl 0.000 659.776 659.776 0.00 0.97 0 189 0 30 -- Randy Jarrett WA4MEI UUCP ...!gatech!wa4mei!rsj | US SNAIL: P.O. Box 941217 PHONE +1 404 493 9017 | Atlanta, GA 30341-0217