Path: utzoo!attcan!uunet!uport!ken
From: ken@uport.UUCP (Ken Chapin)
Newsgroups: comp.unix.microport
Subject: Re: doscp cannot copy 4,244,522-byte file
Message-ID: <278@uport.UUCP>
Date: 16 Dec 88 16:14:35 GMT
References: <8812160051.AA11151@decwrl.dec.com>
Reply-To: ken@uport.UUCP (Ken Chapin)
Organization: Microport Systems, Scotts Valley, CA
Lines: 17

In article <8812160051.AA11151@decwrl.dec.com> digrazia@asd.dec.com (ZKO3-2/S14) writes:
 > 
 >	I cannot copy a file from a DOS partition to UNIX with doscp.
 >	I issue the commands
 >	    link /dev/rdsk/0s8 /dev/dos/C	;my DOS is in partition 3
 >	    doscp -bm C:/gnu/gnuemacs.tar /gnu
 > 
 >	I'm using System V/AT (PS/2 mod 60, i.e. 80286).
 >	The hard disk contains 2 partitions: DOS & UNIX.  The UNIX
 >	partition contains only SYSTEM V/AT, newly installed.
 > 

The latest version has a "-16" flag to recognize a 16 bit FAT table. Try that.

Ken Chapin         UUCP: ...!{sun | ucbvax | ihnp4}!amdcad!uport!ken
Microport Systems
Technical Support