Path: utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!bloom-beacon!mit-eddie!killer!vector!nobody From: dscatl!mgresham@gatech.edu (Mark Gresham) Newsgroups: comp.dcom.telecom Subject: S'port documentation needed Message-ID: Date: 28 Dec 88 19:03:00 GMT Sender: chip@vector.UUCP Lines: 37 Approved: telecom-request@vector.uucp X-Submissions-To: telecom@bu-cs.bu.edu X-Administrivia-To: telecom-request@vector.uucp X-TELECOM-Digest: volume 8, issue 211, message 7 Greetings, Would someone please identify the following serial port? I would like to identify it; and I need the documentation for it. Please e-mail info only; thanks in advance for any info. The card supports 3 ports: 1 9pin serial, 1 parallel on the card; 1 25pin serial via a ribbon from J1. The main chip has the serial number: CIC83747AZ 8840 FCC ID: FT94UAFT-1100SP FTC - MADE IN TAIWAN R.O.C. is on the parallel socket. FOXCONN XD10121 S3 8839 is on the 9pin socket On the back of the circuit board: 02-004 FTC COMPUTER etched in upper right corner T1712 on label, upper left side S/N: E 882515 on label , center This card was originally in a new Packard Bell AT80286. All help with identification and documentation is appreciated. Please e-mail only! Thanks!! --Mark Gresham ++++++++++++++++++++++++++++++++++++++++++ Mark Gresham Atlanta, GA, USA UUCP: ...!gatech!dscatl!mgresham INTERNET: dscatl!mgresham@gatech.edu ++++++++++++++++++++++++++++++++++++++++++