Path: utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!mit-eddie!killer!vector!nobody From: gould@pilot.njin.net (Brian Jay Gould) Newsgroups: comp.dcom.telecom Subject: Switched 56k information (please!) Message-ID: Date: 29 Dec 88 15:54:15 GMT Sender: chip@vector.UUCP Lines: 21 Approved: telecom-request@vector.uucp X-Submissions-To: telecom@bu-cs.bu.edu X-Administrivia-To: telecom-request@vector.uucp X-TELECOM-Digest: volume 8, issue 212, message 3 I sent out a request before for information about switched 56kbps offerings in the industry. I really have only one question about each offering, and no one has been able to even offer a hint as to the solution. *** How do you send the destination telephone number from *** the host to the switched-DSU, and from the DSU to the *** CO? I am not talking about ISDN, but today's offerings. I had a switched 56kbps link from MidAmerican Long Distance, and had to manually enter the digits on the DSU. The DSU then sent pulses (YES, on a digital circuit) to the switch. What I'd really like is either inband (like the Hayes AT command set) or out-of-band (like a 300bps async port) to give the number to the DSU. Any BOC or IXCs out there? -- ------------------------------------------------------------------------- - Brian Jay Gould :: INTERNET gould@jvnca.csc.org BITNET gould@jvncc - - UUCP rutgers!njin!gould Telephone (201) 329-9616 - ------------------------------------------------------------------------s