Path: utzoo!attcan!uunet!lll-winken!lll-ncis!helios.ee.lbl.gov!pasteur!ucbvax!ucdavis!deneb.ucdavis.edu!flocchini
From: flocchini@deneb.ucdavis.edu (0048;0000012204;200;745;53;)
Newsgroups: comp.sys.amiga
Subject: FastFileSystem and CSA Controller
Message-ID: <3452@ucdavis.ucdavis.edu>
Date: 7 Jan 89 16:48:48 GMT
Sender: uucp@ucdavis.ucdavis.edu
Distribution: na
Lines: 18

I am having problems trying to install the 1.3 FFS on my system.
The system is a 1000 with a CSA Turbo box. I have two 40 Meg Conner
drives. THe other night I decided I would try to put the FFS on the
second drive. After formatting with 1.3 I then tried to copy files
to this drive. I would get a message indicating a read/write error
and basically had to go back to format again. I repeated this a 
couple of times with the same result. Finally I formatted the drive
with 1.2 format and everything seems to be back to normal. Has 
anybody with a CSA system been successful with 1.3 FFS or maybe is
there something I am missing. The box also has the 20 board, 1MB of
32bit memory and an ASDG memory board. When formatted with 1.2 the
system will work with 1.3 disks. I just can't get the FFS on the
drive. My hard disk device is that provided by CSA in Nov 87.
Thanks in advance. Please email to
rgflocchini@ucdavis.edu
flocchini@deneb.ucdavis.edu

Bob Flocchini