Path: utzoo!attcan!uunet!husc6!mailrus!cornell!batcomputer!itsgw!imagine!pawl11.pawl.rpi.edu!snyderw
From: snyderw@pawl11.pawl.rpi.edu (Wilson P. Snyder II)
Newsgroups: comp.sys.amiga.tech
Subject: Usine ROM in Amiga 1000
Message-ID: <2196@imagine.PAWL.RPI.EDU>
Date: 27 Dec 88 23:20:30 GMT
Sender: news@imagine.PAWL.RPI.EDU
Reply-To: snyderw@pawl11.pawl.rpi.edu (Wilson P. Snyder II)
Organization: RPI Public Access Workstation Lab - Troy, NY
Lines: 28


	I have a 1.3 ROM for the 2000/500 computer, and am interfacing it
to my Amiga 1000, now through the expansion bus.

	1.  What would be a good chip to piggy back on so that I can
 	    move my board inside?  I need only the major address and
	    data lines, plus the clock.  I have considered the 68000, but
 	    thought thatanother chip might be better.

	2.  How can I change the address of the 256K kickstart ram, as my
	    ROM will need to go into it's address space, and I want to use
	    the ram.

	3. The ROM is add the same as the Kick RAM isn't it?  All of
	    my sources suggest so.

	4.  Has anyone out there created a ROM: by putting programs onto
	    EPROMS to save ram?  Would be interested in any such attempts.

	Thanks.



______________________________________________________________________
Wilson P. Snyder II		snyderw@pawl.rpi.EDU
15 Davis Parkway		518-276-2764
So. Burlington, VT 05403	802-658-3799 in summer (That's now)
______________________________________________________________________