Xref: utzoo comp.sys.amiga:27257 comp.sys.amiga.tech:3004
Path: utzoo!attcan!uunet!husc6!mailrus!purdue!gatech!udel!udccvax1!muzak
From: muzak@vax1.acs.udel.EDU (Stephen F Felicetti)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: non-working second drive - part 3 - The End!!
Summary: It WORKS!! :-)
Message-ID: <2614@udccvax1.acs.udel.EDU>
Date: 3 Jan 89 04:49:54 GMT
Reply-To: muzak@vax1.acs.udel.EDU (Stephen F Felicetti)
Followup-To: comp.sys.amiga
Organization: University of Delaware
Lines: 21



                               -----------

MANY thanks to all who responded to my postings...the drive finally works!!
The problem was, in fact, the jumper on the drive itself -- I had to change
it from 'JS0' to 'JS1'.  I can only wonder how many other 2000 owners have
had this problem -- the installation instructions included with the A2010
say NOTHING about adjusting this jumper.  They could at least include it in
the troubleshooting section of the manual.  I wasted quite a lot of time 
needlessly ripping apart my computer trying to locate the source of the
problem.  I'm just grateful I didn't have to pay some repair center labor
charges for swapping one stupid jumper!

Thanks again to all who sent suggestions!!

                          --  Steve :-) Felicetti


PS - That drive must have a powerful motor if it could drive me up a wall
     like that!! :-D