Path: utzoo!attcan!uunet!husc6!bloom-beacon!tut.cis.ohio-state.edu!mailrus!uflorida!haven!ames!pasteur!ucbvax!NIEHS.BITNET!ALBRO
From: ALBRO@NIEHS.BITNET
Newsgroups: comp.sys.apple
Subject: RE: Apple-Kermit
Message-ID: <8812281822.aa00622@SMOKE.BRL.MIL>
Date: 28 Dec 88 22:47:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 6

This is a reply to Rob Catobn's question about why Kermit (3.79?) hangs up,
and so does ASCII Express, but not ProComm-A.  Rob, you have the jumper on
your Promodem set to pass "true" carrier detect signals.  The jumper has
to be moved to the other position (carrier detect alwatys high) in order to
connect usinfg either AE or Kermit.  Good luck.  P.s. Put the jumper back
again to use ProComm-A.