Path: utzoo!attcan!uunet!husc6!mailrus!csd4.milw.wisc.edu!uwmcsd1!marque!lakesys!rich
From: rich@lakesys.UUCP (Richard Dankert)
Newsgroups: comp.sys.atari.st
Subject: Re: monocrome monitor problems
Message-ID: <264@lakesys.UUCP>
Date: 2 Jan 89 01:37:02 GMT
References: <MRD.89Jan1105242@sun.soe.clarkson.edu>
Reply-To: rich@lakesys.UUCP (Richard Dankert)
Organization: Lake Systems - Milwaukee, Wisconsin
Lines: 31

In article <MRD.89Jan1105242@sun.soe.clarkson.edu> mrd@sun.soe.clarkson.edu (Michael DeCorte) writes:
>
>Hello,
>
>Seems my monitor has gone on the fritz.  
>
>Well, without prints I am hopeless.  Any ideas as to what may have
>blown?  or maybe what the prints are for this thing so I can figure it
>out myself? (I used to do this sort of thing, fixing Atari's and TV's 
>back in HS)

	Suggestion here;

	RE: GoldStar Monitors for Atari

	I would go to my local GoldStar servicing dealer and see if if 
you can get your hands on a diagram for the GoldStar CMT chassis line.

	There all pretty much the same in that line. Anyways, don't bother
with the parts and part numbers, or the tuners, or the power supply for that 
matter, but the scan circuits are pretty much the same. Part numbers arn't 
but the rest should do. 

	The Power supplys are different, but the MonoChrome monitor thay 
make for Atari is a switching supply, so nothing big there. Tuners ? Who
cares, it doesnt use them.

	It's what I  have been using to figure them out.

	rich.....
	UUCP: rich@lakesys.lakesys.COM     {always .... }