Path: utzoo!utgpu!attcan!uunet!van-bc!sl
From: sl@van-bc.UUCP (pri=-10 Stuart Lynne)
Newsgroups: comp.unix.xenix
Subject: Bell Tech Cartridge and Xenix
Keywords: SCO BTI
Message-ID: <2057@van-bc.UUCP>
Date: 23 Dec 88 09:48:11 GMT
Organization: Public Access Network, Vancouver, BC.
Lines: 21

I've just discovered that you can run the Bell Tech XTC cartridge
drive with the standard Xenix drivers. Neat and faster!

In /usr/sys/io/ctconf.asm you need to set:

	CTCNTRLR	EQU	3
	CTDMACH		EQU	1
	CTINT		EQU	5
	CTBASE		EQU	0300H

and rebuild your kernel.

Then readdress the drive from #3 to #1.  I have a Wangtec which has a four
way jumper selection area, with the jumper on the third pair. Simply had to
move it to the first pair.

The SCO driver seems to be a lot nicer than the Bell Tech one, although the
one I have from them is a year old. They might have a better one now. 

-- 
Stuart.Lynne@wimsey.bc.ca {ubc-cs,uunet}!van-bc!sl     Vancouver,BC,604-937-7532