Path: utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!bloom-beacon!sunchat.UUCP!richb
From: richb@sunchat.UUCP (Rich Burridge)
Newsgroups: comp.windows.x
Subject: trouble building R3 on an IBM PC/Rt
Message-ID: <8812260346.AA15827@sunchat.sun.oz>
Date: 26 Dec 88 19:42:32 GMT
Sender: daemon@bloom-beacon.MIT.EDU
Organization: The Internet
Lines: 36

Please reply direct to George Michaelson at the address given below, or to
the comp.windows.x newsgroup or the xpert mailing list.

--- Forwarded mail from ggm@brolga.cc.uq.oz (George Michaelson) 

From: ggm@brolga.cc.uq.oz (George Michaelson)
Subject: trouble building R3 on an IBM PC/Rt
Date: 23 Dec 88 00:20:50 GMT
Organization: University of Queensland, Brisbane, Australia

I am attempting to build R3 on a pc/rt and having some problems.

	include file /usr/include/machinecons/buf_emul.h is missing, but
	required by BSDrt/bsdInitEmul.c I appear to have found a way to
	fudge round this, at least to get past hc -c phase.

	signals SIGGRANT and SIGRELEASE are not defined for my system,
	but cannot be avoided if BSDScreenEvent() is to be compiled in.
	ibmIO.c appears to demand this module be present.

the README for server/ddx/ibm states problems are known to exist for
aed16 and fixes are being worked on by erik@ibmuupa but that address
is unreachble by me via uunet.

If anyone can offer any help or advise (other than junking the rt..)
I would be very greatful.

	-george

-- 
ACSnet: ccggm@brolga.decnet.uq.oz                    Phone: +61 7 377 4079
Postal: George Michaelson, Prentice Computer Centre
          Queensland University, St Lucia, QLD 4067 


--- End of forwarded message from ggm@brolga.cc.uq.oz (George Michaelson)