Path: utzoo!utgpu!watmath!clyde!att!ucbvax!BARILVM.BITNET!P85025
From: P85025@BARILVM.BITNET (Doron Shikmoni)
Newsgroups: comp.protocols.ibm
Subject: Channel-attached 3274 lookalikes
Message-ID: <8901111227.AA05058@jade.berkeley.edu>
Date: 11 Jan 89 11:03:26 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: Doron Shikmoni <P85025%BARILVM.bitnet@jade.berkeley.edu>
Organization: The Internet
Lines: 18

I'm looking for some inexpensive hardware that will connect to
a 370 channel bus and will present itself as a 3274 clone.
Preferrably, this hardware should serve a few terminals; but
even one terminal support will help me a lot. Such a box can
be self-contained, or a card for a PC, or whatever. The idea
is to have some terminals attached to a "bare" machine, for
the minimum that's required - namely, a console.

If you have some rough price quotations - this will help a lot too.

(The reason for all this - I want to partition a 3090 into LPARs,
and run a test opsys on one of the partitions; however, I'll need
some CU to serve the MVS console there, since PR/SM partitions
contain whole CHPIDs - I can't dedicate one or two consoles to
a certain partition).

Thanks; please reply to me personnaly, to save network bandwidth.
Doron